Table of Contents
Advertisement
About This Guide
This document describes the basic setup, features, and operation of the ML628
Virtex®-6 FPGA GTX and GTH transceiver characterization board. The ML628 board
provides the hardware environment for characterizing and evaluating the GTX and GTH
transceivers available on the Virtex-6 XC6VHX380T-2C FFG1923 FPGA. The latest revision
of this document is available online at:
Guide Contents
This user guide contains the following chapters and appendices:
•
•
•
•
•
To find additional documentation, see the Xilinx website at:
To search the Answer Database of silicon, software, and IP questions and answers, or to
create a technical support WebCase, see the Xilinx website at:
Conventions
This document uses the following conventions. An example illustrates each convention.
Typographical
The following typographical conventions are used in this document:
ML628 Board User Guide
UG771 (v1.0.1) June 28, 2011
http://www.xilinx.com/products/boards/ml628/reference_designs.htm
Chapter 1, ML628 Board Features and
and operation of the ML628 Virtex-6 FPGA GTX and GTH transceiver
characterization board.
Appendix A, Default Jumper
board for proper operation.
Appendix B, VITA 57.1 FMC HPC Connector
the FPGA mezzanine card (FMC) connector.
Appendix C, ML628 Master UCF
constraints file (UCF).
Appendix D,
References, provides a list of references and links to related
documentation.
http://www.xilinx.com/support/documentation/index.htm.
http://www.xilinx.com/support.
www.xilinx.com
Operation, describes the components, features,
Positions, lists the jumpers that must be installed on the
Pinout, provides a pinout reference for
Listing, provides a listing of the ML628 master user
Preface
5
Advertisement
Table of Contents
