Philips 3007 Series Service Manual page 22

EN 22 5. TPM9.2HE LA
Table 5-3 Factory mode overview(note: Some indicated factory mode items are optional.)
Item Item value
1 Brand
2 Ver
3 Loader Ver
4 NVM Ver
5 Date
6 Model name
7 SYB
8 Scaler
9 PQ Ver
10 AQ Ver
11 Tuner type
12 Panel type
13 Current source
14 Auto color
15 ADC R Gain
16 ADC G Gain
17 ADC B Gain
18 ADC R Offset
19 ADC G Offset
20 ADC B Offset
21 WD Pattern
22 Color temp
23 Scaler R Gain
24 Scaler G Gain
25 Scaler B Gain
26 Scaler R Offset
27 Scaler G Offset
28 Scaler B Offset
29 Clr temp copy
30 Burn in
31 EEPROM
32 Back LIT time
33 Blacklight Max
34 Blacklight Min
35 EPA4 STD BACK LIT
36 Language
37 Reaet
38 OAD Enable
39 VGA Switch
40 BAUD RATE
41 VGA UART
42 EFUSE
43 Rotate
44 CH info to USB
45 NETWORK CHANGE
46 AQ index
47 ORT mode
48 Update EDID
49 Audio flat mode
50 Flash to USB
51 USB to flash
52 Exit
How to Exit the Factory mode
Use one of the following methods:
• Select EXIT_FACTORY from the menu and press the "OK"
button.
Note: When the TV is switched "off" by a power interrupt, or
normal switch to "stand-by" while in the factory mode, the TV
will show up in "normal operation mode" as soon as the power
is supplied again. The error buffer will not be cleared.
5.2.6 Customer Service Mode (CSM) (series HFL3117D/10 do not
have CSM)
Purpose
The Customer Service Mode shows error codes and
information on the TV's operation settings.The call centre can
instruct the customer (by telephone) to enter CSM in order to
2013-May-30
Service Modes, Error Codes, and Fault Finding
Default value
32" 42" Description
Philips Brand
2.00 1.002A Software version
V15.1665 V15.1665 Boot loader version
V3.000 V2.000 NVM?store at EEPROM? version
Oct11 2012 Sep 14 2012 Software build date
32HFL3117D 42HFL3117D Model Name
Philips AU Philips AU Sytem build name
MT5366 MT5366 Scaler
V01 V0912 PQ version, for picture
AQ1.0000 AQ1.0000 AQ version, for audio quality
UNKNOW Tuner type
See table 6-3 Display code Pannel type
overview
TV Current source, the last source when get in the factory menu
no Auto adjust the colour parameters(below items from 14 to 20) to default value
0 Red gain parameter for ADC
0 Green gain parameter for ADC
0 Blue gain parameter for ADC
128 Red offset parameter for ADC
128 Green offset parameter for ADC
128 Blue offset parameter for ADC
OFF White pattern
cool Tint
-18 -19 Red gain parameter for Scaler
-12 -16 Green gain parameter for Scaler
0 Blue gain parameter for Scaler
-1 Red offset parameter for Scaler
-1 Green offset parameter for Scaler
-1 Blue offset parameter for Scaler
>> Color temp copy
NO Switch burn in mode
Press Initial EEPROM
000Hr Backlight sum time
255 Maximum value of Blacklight
255 Minimum value of Blacklight
90 Backlight default value in normal mode (viewing mode)
Language select
Press Reset TV set to virgin mode
No Enable/Disable the OAD function
EDID VGA Switch
115200 Uart baud rate
DISABLE Enable/Disable VGA used as UART(abandon)
ENABLE EFUSE
DISABLE Rotate the parttern
Press Copy the channel list and info to USB
Press Enable/disable display Network change message
3 AQ data's Index in NVM of this model
Press on Determine after AC on, TV enter standby/on/last status mode
Press Update EDID
No Audio flat mode
Press Copy NVM from TV to USB
Press Copy NVM from USB to TV
Exit the factory menu
quality
identify the status of the set.This helps the call centre to
diagnose problems and failures in the TV set before making a
service call.
The CSM is a read-only mode; therefore, modifications are not
possible in this mode.
Specifications
• Ignore "Service unfriendly modes".
• Line number for every
line (to make CSM language independent).
• Set the screen mode to full
screen (all contents on screen is visible).
• After leaving the Customer Service Mode, the original
settings are restored.
• Possibility to use "CH+" or "CH-" for channel surfing, or
enter the specific channel number on the RC.
back to
div. table