Table of Contents
Advertisement
4.2
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3
Assembly/Panel Removal
Instructions below apply to the 42HFL3017D/10, but will be
similar for other models.
4.3.1
Rear Cover
Refer to
Figure 4-9
for details.
Warning: Disconnect the mains power cord before removing
the rear cover.
1. Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set. Then remove the fixation
screws [2], [3], [4] that secure the rear cover. Refer to
Figure 4-9
for details.
2. Lift the rear cover from the TV. Make sure that wires and
cables are not damaged while lifting the rear cover from the
set.
Mechanical Instructions
Figure 4-8 Cable dressing (3117 series 42")
back to
div. table
TPM9.2HE LA
4.
19361_101_121212.eps
EN 15
121212
2013-May-30
Advertisement
Table of Contents
