Components Functions - TALARIA STING Owner's Manual

Components Functions

4-1 Setting Button
(not available while riding)
4-2 Status Display
(including WAIT/READY/ECO/SPORT/ERROR)
4-3 Real-Time Speed
4-5 Single Range
4-6
Re-Gen Levels Indicator
4-7 Button M
(When the electric motorcycle is switched on and stationary, hold down the setting button for a
while to enter into the dash setting. And after the dash setting finished, press button M to confirm and save the dash
settings. Beside this, regularly, the button M is also used to switch the riding modes between ECO and SPORT)
4-8 & 4-9 Selection Buttons
down the setting button for a while to enter into the dash setting. Then, you can use the selection buttons to select
the settings by up and down. Beside this, regularly, the selection buttons are also used to select the re-gen levels.)
4-10 EXIT
(exit any settings)
4-11 Riding DATA
(Including average energy consumption, maximum speed, average speed, startup running
time, mileage).
4-12 Switch for KM/H and MPH.
4-13 Wheel Diameter Setting
4-14 Gear Ratio Setting
4-15 Battery pack information
Illustration 4
(1, 2, 3, 4 re-gen levels can be set)
(up/down) (When the electric motorcycle is switched on and stationary, hold
.
（17" or 19"）
(Battery voltage, capacity, cycle index)
4-4 Battery Display