Advertisement
•
If any problems are found by the inspection, please ride your electric motorcycle after solving the problems.
If any problems you cannot find the solution by yourself, please contact the local dealer to do the maintenance.
Caution:
•
Both front and rear brakes are disc brakes, once the brake pads got severe wear and tear, then, you should
replace the brake pads.
•
For daily use, please keep the disc brake being clean. To make sure the silt and oil contamination will not
adhere on the disc brakes, we suggest you to clean the disc brakes after every off-road riding, and regularly
clean the disc brakes after non-off-road riding.
Inspection of Operating Components
•
Before riding, please inspect whether the front fork got any faults, such as bend, deformation, damages,
loose, oil leaking, and so on. Hold the handlebar to compress the front fork to see whether any noise caused
by the faults of front fork. If any faults are found by the inspection, please contact the local dealer for
maintenance.
•
Inspection of the rear shock absorber
•
Inspection of the brake levers.
If the free travel is out of the range of 15mm to 30mm, then, need to be adjusted.
•
Inspect the brake performance. Ride the electric motorcycle slowly on a safety ground, squeeze the front and
rear brake levers to check whether the brakes perform properly. For abnormal brake performance, please
check whether the brake pads need to clean or be replaced, or need to add the brake oil. If still have problems,
please contact the local dealer for solution.
Inspection of Tires, Wheels System, Transmission, etc
•
Before riding, please inspect the tire pressure by the tire pressure meter.
•
Before riding, inspect whether the tires got cracks, damages, abnormal wears, and sharp objects on the tires.
•
Before riding, please check whether have any spokes are loose.
•
Before riding, please inspect the tension of the chain, and make sure the chain be tensioned properly.
•
During the riding, the tires will keep contacting on the ground for a long time. The nails, sharp-edged pebbles,
and broken glass can easily stab into the tires to cause damages, and lead to serious hazards. Therefore,
when you ride the electric motorcycle, we suggest you to pay attention the to ground situation, and avoid to
ride the electric motorcycle on the ground where have nails, sharp-edged pebbles, and broken glass. For
your safety, before every riding, we suggest you to inspect the whether the tires got cracks, damages,
abnormal wears, or are stabbed by the nails, sharp-edged pebbles, and broken glass. If any one of the
mentioned cases happened to the tires, please repair or replace the tire(s) to ride.
•
Before riding, please check the tire tread. If the tire tread is worn out equal or more than 2/3, then, the tire(s)
need to be replaced by the new tire(s).
Inspect when the free travel of brake lever is in the range of 15mm to 30mm.
Hide quick links:
Advertisement
