Advertisement
Caution：
•
When you charge the battery pack, please make sure the charging place cannot be reached by any kids.
•
The battery pack, which just finished the discharge, will have a high internal temperature. Please don't charge
the battery pack immediately. Before charging, we suggest to cool down the battery pack in a ventilated place
for 30 minutes.
•
After the battery pack is fully charged, before use, we suggest to rest the battery pack for 10 minutes.
•
When you charge the battery pack, please make sure nothing covers on the charger. And the charger is
designed to use in door, please use or store the charger in a dry and ventilated place.
•
During the charging, if there's the strange smell or found the temperature is too high or the battery pack
cannot be fully charged for a long time, please stop charging immediately and send it to the qualified
maintenance store to check.
8-1 Oil Rule Cap & Oil Filling Hole
8-3 Gas Vent
Usage and maintenance of gearbox and controller
•
Regularly check whether the gearbox fixing screws are loose, and the lubricating oil level is between the
upper and lower tick marks. Please don't ride the electric motorcycle, if the gearbox got short of or without
lubricating oil. Otherwise, damages will happen to the gearbox. After the running-in period, replace the
lubricating oil every 1000KM (Lubricating oil grade: CL-5 85W/90). To replace the lubricating oil, firstly, loosen
the oil rule cap screw on the gearbox. And then, loosen the oil drain bolt to drain out the used lubricating oil.
If there's no used lubricating oil drain out, please clean the dirt on the magnetic core of oil drain bolt, and
then, fix it back on the gearbox, and fill 120-150ml lubricating oil into the gearbox through the oil filling hole.
•
Regularly check whether the connection wires between motor and controller are loose, and whether the
insulation of the wires has a good condition.
•
Regularly check whether the fuse is loose or melted.
•
It's not recommended to ride your electric motorcycle in the deep puddles. Otherwise, the motor may work
incorrectly.
•
It's not recommended to use high-pressure washer to flush the motor and
Pre-riding inspection
Illustration 8
8-2 Oil Drain Bolt
controller.
Hide quick links:
Advertisement
