Advertisement
Charging and Charger Information
7-1 Battery Pack Discharging Interface
7-3 Battery Power Indicator
•
Only charge the Talaria battery pack with the approved Talaria accessory charger. Any other unapproved
chargers may cause damages to the battery pack, and lead to serious hazards.
•
Check the charger to make sure the input voltage marked on the charger is correct for the local power supply
voltage (AC 110V / AC 220V).
•
The battery pack could be charged when it's mounted on the electric motorcycle, or plug out the battery pack
to charge directly.
•
Caution: When you charge the battery pack, firstly, please connect the DC input connector with the battery
pack charging interface. Then, connect the AC power cord with the power supply socket. Once the battery
pack is fully charged, firstly, please disconnect the AC power cord. After the indicator extinguished, then,
disconnect the DC input connector.
•
When the battery pack is charging, the red indicator will twinkle. And after the battery pack is fully charged,
the green indicator will be constantly on. Usually, it will take about 4 hours to fully charge the battery pack.
•
After the battery pack is fully charged, the charging will be shut down automatically. But in consideration of
safety, we suggest you disconnect the AC power cord from the power supply socket within 6 hours after the
battery pack is fully charged.
•
Any unqualified and unskilled people will not be allowed to disassemble the battery pack. Otherwise,
damaged will be caused to the battery pack, and lead to serious hazards.
•
When the battery pack is inactive, you can activate it by the activation button on the battery pack or connecting
the charger.
Illustration7
7-2 Ventilative Valve
7-4 Activation Button
Hide quick links:
Advertisement
