Determining the Installation Site
4" (100 mm)
4" (100 mm)
Notes on wireless LAN
•
This product is designed for indoor use 164'/50 m (may vary on the communication speed or environmental condition) or less away from an access
point. Keep it at an appropriately close distance.
•
Check if masking is found or not. Communications across walls or between floors are generally deteriorated. Arrange appropriate installment.
•
Radio wave interference may occur if any radiowave emitting equipment (i.e. microwave) is found near the product and its radiowave is in the same
frequency band as the radiowave used by a wireless LAN. Keep the product away from those radio wave interference sources as much as possible.
Carr ying the Machine to the Installation Site
and Removing the Packing Materials
1.
Take the machine out of the plastic bag, and then carry to the
installation site.
Hold the grips.
2.
Remove the packing materials.
Remove the packing materials.
6
50 3/8" (1,279 mm)
4" (100 mm)
4" (100 mm)
* Do not remove the cap (A) on the USB
port at this stage. Uncap when installing
for USB connection.
(A)
23 1/4"
(590 mm)
Carry the machine.
* The packing materials may be changed in form or placement, or may be
added or removed without notice.
Remove the unpacking manual.
4" (100 mm)
31 3/8"
(795 mm)