Connecting The Power Cord - Canon imageCLASS MF5950dw Starter Manual

1 2
Preface Installing the Machine
Load the paper.
Load the paper that it aligns
with the rear side of the paper
drawer .
3.
Set the paper drawer.

Connecting the Power Cord

Make sure that the machine is
switched OFF.
Do not connect the USB cable. Connect the USB cable when installing the software.
3
Configuring and Connecting the Fax
Set the paper under the hooks.
Hooks
Hooks
Plug the power plug into the
power socket.
4
Connecting to a Computer and
Installing the Drivers
Check!
Make sure that the paper stack does
not go over the line of the load limit
mark.
Hooks
Plug the power plug into an
AC power outlet.
Appendix
Up to here
11