Canon FAXPHONE B95 User Manual page 95

• Discard the old BJ Cartridge
consumables. You may want to place it in a plastic bag to keep any residual ink from spilling.
• Spilled ink can stain any surface; protect yourself and your work area.
4 Remove the new BJ Cartridge
a
and tape
1
• Discard the cap and tape. Never attempt to reattach them to the BJ Cartridge
• Install the BJ Cartridge
• Spilled ink can stain any surface; protect yourself and your work area.
5 With the label facing outwards, and align the slot in the cartridge with the yellow post in
the fax, insert the BJ Cartridge
b
lever until you hear a click to lock the cartridge in place.
The yellow post (BJ Cartridge
slightly to the left before lowering the cartridge lock lever.
6 Close the printer cover.
If the AUTO TEST PRINT setting is set to ON:
The fax automatically prints a test page.
The fax prints a test page every time you insert a BJ Cartridge
• Load the paper in the multi-purpose tray before you replace the BJ Cartridge
• You can turn off automatic test printing by changing the AUTO TEST PRINT setting. See
SYSTEM SETTINGS, p. 8-5.
9-6
®
immediately according to the local laws and regulations for disposal of
®
from its package, then remove the orange protective cap
b
.
2
®
immediately after removing the cap and tape.
®
into the cartridge holder
2
1
®
guide) should be visible through the slot. The BJ Cartridge
®
print head.
a
. Lower the cartridge lock
®
.
®
tilts
®
.