Connection Of The Equipment - Canon MultiPASS C560 User Manual

n
Canon recommends an individual line following industry standards, e.g. the 2500 (Touch Tone)
or 500 (Rotary/Pulse Dial) telephones. A dedicated extension off a PBX unit without "Call
Waiting" can be used with your MultiPASS. Key telephone systems are not recommended because
they send non-standard signals to individual telephones for ringing and special codes, which may
cause a fax error.
C. Power Requirements
This equipment should be connected to a standard 120 volt AC, three-wire grounded outlet
only. Do not connect this unit to an outlet or power line shared with other appliances that
cause "electrical noise". Air conditioners, electric typewriters, copiers, and machines of this
sort generate electrical noise which often interferes with communications equipment and the
sending and receiving of documents.

CONNECTION OF THE EQUIPMENT

This equipment complies with Part 68 of the FCC rules. On the rear panel of this equipment is a
label that contains, among other information, the FCC Registration Number and Ringer
Equivalence Number (REN) for this equipment. If requested, this information must be given to
the telephone company. This equipment may not be used on coin service provided by the
telephone company. Connection to party lines is subject to state tariffs.
Preface v