Reducing Or Enlarging A Copy - Canon PIXMA MP830 User Manual

Note
To cancel copying, press [Stop/Reset].
The machine can also receive faxes in copy mode (when [COPY] is pressed).

Reducing or Enlarging a Copy

You can reduce or enlarge copies.
1
Prepare for copying.
See "Prepare for copying." on page
2
Select the reduction/enlargement method.
The example below assumes that you will select <Zoom (25-400%)>.
(1) Press [Settings].
(2) Use [ ] or [
(3) Use [ ] or [ ] to select <Magnification>, and use [
400%)>.
Specify the custom copy ratio for reducing or enlarging copies.
Besides <Zoom (25-400%)>, you can also choose from the following reduction/
enlargement methods.
Same magnification: Copies in the same size as an original.
Preset ratio:
Fit-to-page:
Note
When loading the document on the ADF, you cannot select <Fit-to-page>.
(4) Press [ ] to move the cursor down, and use [
Holding down [
Note
When you choose <Fit-to-page>, the document size may not be detected correctly depending
on the document. In that case, choose <Same magnification>, <Preset ratio> or <Zoom (25-
400%)>.
3
Finalize your selection.
(1) Press [Settings].
Return to the Copy standby screen.
4
Start copying.
See "Start copying." on page
Chapter 2
42.
] to select Tab 1.
(3)
Preset ratios are convenient when changing between standard page sizes,
for example, when reducing A4 to A5, or enlarging B5 to A4.
You can automatically reduce or enlarge the document to fit the size of the
paper which are loaded in the Auto Sheet Feeder or Cassette.
] or [ ] steps through the values faster.
42.
] or [ ] to select <Zoom (25-
] or [ ] to select the setting value.
Copying 43