Canon PIXMA MP830 User Manual page 19

(14) Auto Sheet Feeder Lamp
Lit when the Auto Sheet Feeder is selected.
(15) Cassette Lamp
Lit when the Cassette is selected.
(16) [Feed Switch]
Selects the paper source. Press this toggle switch to change the paper source between
the Auto Sheet Feeder and Cassette.
(17) [Photo Index Sheet]
Switches to Photo Index Sheet mode. See
page 66.
(18) [Enlarge/Reduce]
Sets the enlargement or reduction ratio for copying.
(19) [Search]
Looks up target photos in the memory card using the shooting date as the search key.
See "Searching for Photos with the Shooting Date (Search)" on page
(20) [Two-Sided]
Specifies settings for <Two-sided copy>.
(21) [FAX Quality]
Sets the resolution of the fax you are sending.
(22) [Back]
Allows you to return to the previous screen.
(23) [OK]
Finalizes your selection for the menu or setting item.
Restores the machine to normal operation after a printing error was resolved, or if paper
jams are cleared. Ejects documents remaining in the ADF.
(24) [ ] [ ] [
Scroll through menu selections, and increase or decrease the number of copies. You can
use these buttons when < >, < >, <
[ ] cancels the entered character, and [
entering characters.
(25) [Trimming]
Use to crop the photo that is displayed. See
page 60.
(26) [Tone]
Switches temporarily to tone dialing. Also changes the mode when entering characters.
(27) [Redial/Pause]
Redials the last dialed number using Numeric buttons. Also enters pauses between or
after numbers when dialing or registering numbers.
(28) [Coded Dial]
Press this button and a two-digit code to dial a pre-registered fax/telephone number or
group.
(29) [Hook]
Engages or disengages the telephone line.
(30) [Black]
Starts black & white copying, scanning, or faxing.
(31) [Color]
Starts color copying, photo printing, scanning, or faxing.
Chapter 1
] [ ]
"Printing by Using the Photo Index Sheet" on
>, and < > are displayed on the LCD. Also
] enters a space between characters when
"Printing a Specified Area (Trimming)" on
Before Printing
59.
17