Note
The machine cannot scan the area within about 0.08" / 2 mm from the rear edge, and
within about 0.08" / 2 mm from the left edge of the Platen Glass.
You can also scan in originals that are up to 0.8" / 20 mm thick, such as books. Set them
on the Platen Glass in the same way as documents.
3
Gently close the Document Cover.
Using The ADF
Note
Set a document on the Platen Glass if you want to scan it at optimum quality.
When the document is set to the ADF, the first 0.08"/2mm of the leading edge of the
document (the part that is first scanned) will not be read.
1
Remove any documents from the Platen Glass.
2
Open the Document Tray.
3
Load the document in the ADF (1).
Load the document with the side you want to copy, fax, or scan face side up in the ADF.
Chapter 1
(1)
Before Printing
21