Fax Settings - Canon imageCLASS MF4270 Basic Operation Manual

FAX SETTINGS

3. TX SETTINGS
1. AUTO REDIAL
ON
REDIAL TIMES
REDIAL INTERVAL
OFF
2. DIALING LINE CHCK
4. RX SETTINGS
1. FAX/TEL OPT. SET
RING START TIME
F/T RING TIME
F/T SWITCH ACTION
Sets the transmission features.
Sets whether to redial automatically when the other line is busy
or a transmission error occurs. (See Chapter 4, "Sending and
Receiving," in the Reference Guide.)
Customizes the redial operation.
Sets the number of retries. (1TIMES–10TIMES (2TIMES))
Sets period of time before redialing. (2MIN.–99MIN. (2MIN.))
After the first attempt at dialing fails, redialing is not attempted.
Sets whether to check the telephone line condition.
– OFF
– ON
Sets the reception features.
Sets the optional items in the <FAX/TEL> mode. (See Chapter 4,
"Sending and Receiving," in the Reference Guide.)
Sets the time the machine takes to check whether a call is a fax
or a voice call. (4SEC–30SEC (6SEC))
Sets the ring length for voice calls. (10SEC–45SEC (22SEC))
Selects whether the machine switches to the receive mode after
the ring time has elapsed, or whether if disconnects the call.
– RECEIVE
– DISCONNECT
12-11