Canon imageCLASS MF4270 Basic Operation Manual page 233

SYSTEM SETTINGS
3. ETHERNET DRIVER
1. AUTO DETECT
AUTO
MANUAL
1. COMMUNICATN
MODE
2. ETHERNET
TYPE
2. MAC ADDRESS
4. VIEW IP ADDRESS
1. IP ADDRESS
2. SUBNET MASK
3. GATEWAY ADDRESS
5. STARTUP TIME SET.
12-20
Specifies the type of network connection.
Selects the detection method of Ethernet driver.
Sets the machine to determine the communication mode (Half
duplex/Full duplex) and Ethernet type (10Base-T/100Base-TX)
automatically.
Sets the communication mode and Ethernet type manually.
Selects the communication mode.
FULL DUPLEX
–
– HALF DUPLEX
Selects the Ethernet type.
100 BASE-TX
–
– 10 BASE-T
Displays the twelve-digit MAC address of your machine.
Checks the current network settings.
Checks the IP address.
Checks the subnet mask.
Checks the gateway address.
Sets the time period required to delay the startup of network
communications for the machine (0SEC–300SEC (60SEC)).