Canon imageCLASS MF4270 Basic Operation Manual page 205

Message
PLEASE WAIT
REMOVE MP PAPER
SET PAPER AGAIN
SET TONER AGAIN
SYSTEM ERROR
EXXX
WRONG PASSWORD
11-18
Description
This message appears when
turning on the main power
switch, or when the machine is
not ready for printing.
Paper is loaded in the
multipurpose tray.
Paper is not loaded properly, or
the toner cartridge is not set.
A system error has occurred.
<XXX> will be a three-digit
code that indicates a particular
type of error.
The memory lock reception
password or system password
you entered is incorrect.
Action
Wait until the message
disappears.
Remove the paper from
the multi-purpose tray. The
machine will not print faxes,
reports, or lists when paper is
loaded in the multipurpose
tray. They will be stored in
memory.
Load paper properly. (For
instructions on how to load
paper in the paper cassette,
see "Set Up the Machine" in
the Starter Guide, and to load
paper in the multi-purpose
tray, see "Loading Paper," on
p. 2-12.)
Set the toner cartridge in the
machine (see "Set Up the
Machine" in the Starter Guide).
Turn off the main power
switch, wait for more than 5
seconds, then turn it on again.
If the message persists, turn
off the main power switch,
disconnect the power cord,
and contact Canon Customer
Care Center.
Enter the correct password.
For details, Chapter 4, "Sending
and Receiving," and Chapter 8,
"System Manager Settings," in
the Reference Guide.