Panasonic SC-EN38GCS Service Manual page 51

Step 17 : Connect 22P FFC cable at the connector (CN302) on
Main P.C.B..
Step 18 : Connect 2P cable at the connector (CN600) on
Transformer P.C.B..
Step 19 : Connect 3P cable at the connector (P651) on Main
P.C.B..
Step 20 : Connect 8P cable at the connector (P900) on Main
P.C.B..
Step 21 : Connect 4P cable at the connector (CN601) on Main
P.C.B..
Step 22 : Use tape to keep the sensors depressed so testing
can proceed.
Step 23 : Check & repair Main P.C.B. according to the diagram
shown.
11.8. Checking & Repairing CD
Servo P.C.B
Note : Insert CD before Checking CD Servo P.C.B.
• Follow (Step 1 - Step 22) of item 11.7
Step 1 : Place a box underneath the Rear Panel to adjust its
position higher.
Step 2 : Check & repair CD Servo P.C.B. according to the
diagram shown.
51
SC-EN38GCS