Panasonic SC-EN38GCS Service Manual page 35

Table of Contents

9.13.1. Assembly of Regulator Transistor

(Q502)

Step 1 : Apply grease to the heatsink unit.

Step 2 : Fix and screws the Regulator Transistor (Q502) to the

heatsink unit.

Note : Ensure the Regulator Transistor (Q502) is tightly

screwed to the heatsink unit.

Step 3 : Solder pin of the Regulator Transistor (Q502) on the

reversed side of Main P.C.B..

Note : Ensure pins of the Regulator Transistor (Q502) are

properly seated and soldered on the Main P.C.B..

9.14. Disassembly of Tact Switch &

Sensor P.C.B.

• Follow the (Step 1) - (Step 3) of item 9.4.

• Disassembly of Tact Switch P.C.B.

Step 1 : Remove 2 screws.

Step 2 : Detach 8P FFC cable at connector (CN952) on Main

P.C.B..

Step 3 : Release 5 catches in order of sequence.

Step 4 : Remove Tact Switch P.C.B..

SC-EN38GCS

Table of Contents