Panasonic SC-EN38GCS Service Manual page 49

11.5. Checking & Repairing Sensor
P.C.B
Step 1 : Remove Rear Panel.
Step 2 : Remove Fan Unit & Transformer P.C.B..
Step 3 : Remove Tact Switch P.C.B. & Sensor P.C.B..
Step 4 : Connect 4P cable at the connector (CN601) on Main
P.C.B..
Step 5 : Connect 8P FFC cable at the connector (CN952) on
Main P.C.B..
Step 6 : Connect 2P cable at the connector (CN600) on
Transformer P.C.B..
Step 7 : Check & repair Sensor P.C.B. according to the
diagram shown.
11.6. Checking & Repairing Tuner
P.C.B
Step 1 : Remove Rear Panel.
Step 2 : Remove Fan Unit & Transformer P.C.B..
Step 3 : Remove Tuner P.C.B..
Step 4 : Connect 4P cable at the connector (CN601) on Main
P.C.B..
Step 5 : Connect 12P FFC cable at the connector (CN1) on
Tuner P.C.B..
Step 6 : Connect 2P cable at the connector (CN600) on
Transformer P.C.B..
Step 7 : Check & repair Tuner P.C.B. according to the diagram
shown.
49
SC-EN38GCS