Panasonic SC-EN38GCS Service Manual page 30

SC-EN38GCS
Step 3 : Remove Voltage Regulator IC (IC502) from the
heatsink unit.
Caution : Handle the heatsink unit with caution due to its
high temperature after prolonged use. Touching it may
lead to injuries.
9.10.1. Assembly of Voltage Regulator IC
(IC502)
Step 1 : Apply grease to the heatsink unit.
Step 2 : Fix and screws the Voltage Regulator IC (IC502) to the
heatsink unit.
Note : Ensure the Voltage Regulator IC (IC502) is tightly
screwed to the heatsink unit.
Step 3 : Solder pin of the Voltage Regulator IC (IC502) on the
reversed side of Main P.C.B..
Note : Ensure pins of the Voltage Regulator IC (IC502) are
properly seated and soldered on the Main P.C.B..
30