Panasonic SC-EN38GCS Service Manual page 25

• Disassembly of Transformer
− Follow the (Step 4) - (Step 6) of (Disassembly of
Transformer P.C.B.)
− Follow the (Step 9) of (Disassembly of AC Inlet P.C.B.)
Step 12 : Remove 4 screws.
Step 13 : Remove Transformer with AC Inlet & Transformer
P.C.B..
Step 14 : Desolder 4 solder point.
Step 15 : Remove Transformer.
9.6. Disassembly of USB P.C.B.
• Follow the (Step 1) - (Step 3) of item 9.4.
Step 1 : Remove 1 screw and 5P Connector (For USB).
Step 2 : Remove Tape.
Step 3 : Detach 22P FFC cable at connector (CN302) on Main
P.C.B..
Step 4 : Remove 1 screw.
Step 5 : Remove USB Unit.
25
SC-EN38GCS