Adjusting Manually
Adjusting Manually
You can adjust the density to the most appropriate
level for the document manually.
Place documents.
1
For details, see "Placing Documents, " on p. 2-4.
Press
[COPY].
2
Press
[Density] to select the
3
manual mode.
Press [
] or [
4
density, then press [OK].
D E N S I T Y
- L T
–
[
]: to make light documents darker
–
[
]: to make dark documents lighter
–
To cancel all settings, press
–
When you switch the mode by pressing the
mode keys such as
be canceled. If you want to keep the settings,
set the density as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <DENSITY> → <MANUAL> (See
"COPY SETTINGS, " on p. 12-4.)
] to adjust the copy
D K +
[Stop/Reset].
[FAX], all settings will
Use
–
[numeric keys] to enter the
5
desired copy quantity (1 to 99).
Ex.
1 0 0 %
T E X T / P H O T O
Press
[Start].
6
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK].
Adjusting Density
L T R
1
4-9