Error Codes - Canon imageCLASS MF4370dn Basic Operation Manual

Error Codes

Error Codes

Error Codes
An error code is a four-digit code shown on an ERROR TX REPORT or an RX REPORT when an
error occurs.
For details on reports, see "Introduction of the Machine, " in the e-Manual.
See the table below for individual error codes.
Error Code
00A0 Transmission was manually canceled on the
machine.
00A1 There is a document jam.
00FF All redialing attempts have failed.
0001 The sender may not be using a G3 fax machine.
0070 Reception was manually canceled on the
machine.
0071 The machine's memory is full.
0080 The recipient's machine did not respond within
35 seconds.
008D The recipient's machine has run out of paper.
Description Action
Resend the document if necessary.
Clear the document jam.
Check if the recipient's number is correct or the
telephone cable is properly connected, and try
again.
Make sure the sender's machine is compatible
with your machine.
Ask the sender to resend the document if
necessary.
Print, send, or delete any documents stored in
memory.
Resend the document. Ask the other party
to check their machine. If you are making an
overseas call, add a pause to the number.
Ask the recipient to make sure that paper is
loaded in their machine.
11-19