Cleaning The Machine; Exterior; Interior - Canon imageCLASS MF4370dn Basic Operation Manual

Laser multifunction printer
Hide thumbs Also See for imageCLASS MF4370dn:
Table of Contents

Advertisement

Cleaning the Machine

Cleaning the Machine

Cleaning the Machine
Note the following before cleaning your machine:
Make sure no documents are stored in memory, then turn OFF the main power switch and
disconnect the power cord.
Use a soft cloth to avoid scratching the components.
Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to
the components or generate static charges.
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean the machine. These can
damage the machine components.
When you turn OFF the main power switch, the data stored in memory will be retained for approximately 5 minutes. To check the
jobs stored in memory, see the following:
"Checking/Changing the Status of Fax Documents in Memory, " on p. 5-45.
"Checking and Canceling Print Jobs, " on p. 6-11.

Exterior

Exterior

Clean the exterior of the machine.
Turn OFF the main power switch and
1
disconnect the power cord.
Wipe the machine's exterior with a clean,
2
soft, lint-free cloth dampened with water
or diluted dishwashing detergent
solution.
Wait for the machine to dry, then
3
reconnect the power cord and turn ON
the main power switch.
10-2

Interior

Interior

Clean the machine's print area periodically to
prevent toner powder and paper dust from
accumulating inside.
Turn OFF the main power switch and
1
disconnect the power cord.
Hold the front side of the operation panel
2
with your hands.

Advertisement

Table of Contents
loading

Table of Contents