Canon PIXMA MX7600 Series Quick Start Manual page 30

2
Prepare to load paper.
(1) Open the Rear Tray Cover and pull out the
Paper Support.
Put your finger in the rounded indent of the
Paper Support and pull it out until it stops.
(2) Open the Paper Output Tray.
Press the Open button to open the Paper
Output Tray.
(3) Open the Output Tray Extension.
3
Load the paper.
(1) Load the paper in the Rear Tray with the print
side facing UP.
(2) Align the paper stack against the Cover Guide
on the right side of the Paper Support.
Note
Make sure that the Cover Guide is set upright
when you load paper in the Rear Tray.
(3) Pinch the Paper Guide and slide it against the
left side of the paper stack.
Important
Do not slide the Paper Guide too hard. The paper
may not be fed properly.
4
Specify the page size and media type settings according to the loaded paper.
When a Media type other than Plain paper is selected, the paper source will switch to the
Rear Tray.
Note
When using the Operation Panel on the machine to perform copying or printing operation
without using a computer, select the size and type of the loaded paper in Page size and Media
type in each mode.
For details on settings in each mode, see "Setting Items" on page 33 for the copy mode and
"Setting Items" on page 41 for the memory card mode.
When using the machine connected to a computer, select the size and type of the loaded paper
in Page Size (or Paper Size) and Media Type in the printer driver.
For details on printer driver settings, see "Printing with Windows" on page 44 or "Printing with
Macintosh" on page 45.
26 Before Using the Machine
(2) (3)
(3)
Do not load higher than the Load
Limit Mark (A).
(1)
(1)
(2)