Canon PIXMA MX7600 Series Quick Start Manual page 138

Message
"The clear Ink has run out. Replace the
ink tank."
U165/U166
"The ink has run out. Stop printing, then
replace the ink tank." (when printing is
in progress) / "The ink has run out.
Replace the ink tank." (when printing is
not in progress)
U171
"Printer detected ink out condition. Stop
printing, then replace the ink tank."
(when printing is in progress) / "Printer
detected ink out condition of the
following ink. Replace the ink tank."
(when printing is not in progress)
U172
134 Troubleshooting
The clear ink has run out.
Replace the clear ink tank with a new one.
If you do not replace the clear ink tank, press the machine's Stop/Reset button
to clear the error. Print job will be canceled.
Print quality will deteriorate considerably and the feeder behind the cassette
may be damaged if printing on plain paper is continued under the clear ink out
condition. For this reason, you cannot print on plain paper until the clear ink tank
is replaced with a new one.
See "Replacing an Ink Tank" on page 103.
Note
Until the clear ink tank is replaced, the machine will not be able to print the
received fax and will store it in its memory. The fax stored in memory needs to
be printed manually.
Important
If you accidentally unplug the power cord and the power is turned off when the
clear ink has run out, the error may not be cleared even after pressing the Stop/
Reset button. Replace the ink tank with a new one.
Ink has run out. (The lamp on the ink tank flashes.)
If printing is in progress, press the machine's Stop/Reset button to stop printing,
replace the ink tank, and then print again. Printing under the current condition
may damage the machine.
To continue printing, you need to release the function for detecting the
remaining ink level. Press and hold the machine's Stop/Reset button for at least
5 seconds, and then release it.
This operation releases the function for detecting the remaining level of the
above ink, and releasing the function is memorized.
Please be advised that Canon shall not be liable for any malfunction or trouble
caused by continuation of printing under the ink out condition.
See "Replacing an Ink Tank" on page 103.
Note
If the function for detecting the remaining ink level is disabled, the ink tank in
gray is displayed on the LCD when checking the current ink level.
See "Getting the Color or Black Ink Status Information" on page 103.
Since printing in this condition may cause the contents of the fax to be lost,
the machine stores received faxes in memory without printing until the ink
tank is replaced. Print the fax stored in memory manually after replacing the
ink tank. You can set the machine to print received faxes forcibly without
storing them in memory, but a part of contents or all contents of the fax may
not be printed.
Machine detected ink out condition (The lamp on the ink tank flashes).
If printing is in progress, press the machine's Stop/Reset button to stop printing,
replace the ink tank, and then print again.
To avoid printing troubles such as the mixing of inks, this machine is designed to
display an error message and stop printing when the remaining ink level in an
ink tank goes under the amount of ink required to maintain both machine and
print quality.
See "Replacing an Ink Tank" on page 103.
Action