Canon PIXMA MX7600 Series Quick Start Manual page 113

When Replacing the Clear Ink Tank
When the clear ink tank (PGI-9Clear) runs out of ink, replace it using the following steps.
Important
Handling Ink
To maintain optimal printing quality, we recommend the use of specified Canon brand clear ink
tanks.
Refilling ink is not recommended.
Once you remove a clear ink tank, replace it immediately. Do not leave the machine with the ink
tank removed. The machine does not operate without the clear ink tank installed.
Do not replace the clear ink tank until the message informing you that the ink has run out is
displayed. If the clear ink tank is replaced before it runs out of ink, the machine will be unable to
accurately inform you when it is time to replace the tank.
Replace an empty tank with a new one. Inserting a partially used ink tank may cause a
malfunction. Furthermore, with such a tank, the machine will not be able to inform you when to
replace the tank properly.
Once a clear ink tank has been installed, do not remove it from the machine and leave it out in
the open. This will cause the ink tank to dry out, and the machine may not operate properly
when it is reinstalled. To maintain optimal printing quality, use a clear ink tank within six months
of first use.
1
Open the Scanning Unit (Printer Cover) and the Paper Output Tray.
(1) Make sure the machine is turned on.
Important
When replacing the clear ink tank, make sure that the machine is turned on. If the ink tank is
replaced when the machine is turned off, the detected ink level may not match the actual ink
level.
(2) Lift the Scanning Unit (Printer Cover) until it
stops.
The Paper Output Tray will open automatically
and the Print Head Holder moves to the center.
Caution
If the Document Cover is opened, you cannot
open the Scanning Unit (Printer Cover). Be
sure to open the Scanning Unit (Printer Cover)
with the Document Cover closed.
Do not hold the LCD.
Do not hold the Print Head Holder to stop or
move it.
Do not touch the metallic parts or other parts
inside the machine.
(A)
(A) Press the Open button to open the
Paper Output Tray if it does not open
automatically.
Routine Maintenance 109