Canon PIXMA MX7600 Series Quick Start Manual page 177

Telephone networking
Connection
Paper size
Paper type
Layout
Image optimize
Print date & file no.
Trimming
Fax Specifications
Sequential broadcasting (max. 109 destinations)
Automatic reception
Automatic fax/tel switchover
DRPD (Distinctive Ring Pattern Detection)
Remote reception by telephone (Default ID: 25)
Non-ring reception
ECM deactivation
Activity report (after every 20 transactions)
Non-delivery report
TTI (Transmit Terminal Identification)
Telephone Specifications
Telephone/answering machine (CNG detecting signal)/data modem
Camera Direct Print (PictBridge)
*2
4" x 6" / 10 x 15 cm , 5" x 7"
*2
20 x 25 cm , A4, 8.5" x 11" (Letter), 4" x 7.1" / 10.1 x 18 cm
*1
Can be selected only on certain Canon-brand PictBridge compliant
devices.
*2
This paper cannot be fed from the Cassette. Load in the Rear Tray.
*3
May appear as "Hi-Vision" on a non Canon-brand PictBridge
compliant device.
Default (Selections based on the machine setting), Photo (Photo Paper
Plus Glossy, Photo Paper Plus Glossy II, Glossy Photo Paper, Photo
Paper Plus Semi-gloss), Plain (A4/Letter only)
Default (Selections based on the machine setting), Borderless,
*1
Bordered, 20-up , 35-up
*1
You can print shooting Info (Exif Data) on photos in list format (20-
up), or in the margins of specified photos (1-up). Select Layout, then
select the item displayed with the [i] icon.
(Note that this print setting cannot be used for some models.)
*2
Selected photos are printed in 35 mm film style layout (contact
printing layout). This print setting is only available with certain Canon
PictBridge compliant devices.
Default (Selections based on the machine setting), On, Off, "Vivid"*,
"NR" (Noise Reduction)*, "Face"*, "Red-Eye"*
* If using a Canon PictBridge compliant camera, you can select it.
Default (Off: No printing), Date, File No., Both, Off
Default (Off: No trimming), On (follow camera's setting), Off
*1, *2
, CreditCard / 5.4 x 8.6 cm
*2
Appendix
*2
, 8" x 10" /
*2, *3
173