•
Use a cloth to wipe off any mud deposit on the area next to the filler plug (1).
•
Place a container with + 4000 cm³ (244 cu.in) capacity under the drainage
plug (2).
•
Unscrew and remove the drainage plug (2).
•
Unscrew and remove the filler plug (1).
•
Drain the oil into the container; allow several minutes for oil to drain out com-
pletely.
•
Replace the sealing washer of the drainage plug (2).
•
Remove any metal scrap attached to the drainage plug (2) magnet.
•
Screw and tighten the drainage plug (2).
Locking torques (N*m)
Oil drainage plug - M16x1.5
19 Nm (14.01 lbf ft)
ENGINE OIL FILTER REPLACEMENT
•
Change the engine oil filter (3) every 20,000 km (12,428 miles) (or each time
you change the engine oil).
•
Remove the engine oil filter (3).
Never reuse an old filter.
•
Screw the new engine oil filter (3).
Tyres
This vehicle is fitted with tyres without inner tubes (Tubeless).
CHECK TYRE INFLATION PRESSURE REGULARLY, AT LEAST ONCE A
MONTH, AT AMBIENT TEMPERATURE.
99