Passing Button; Flasher Button - APRILIA DORSODURO 750 ABS 2015 Manual

If the vehicle speed reaches zero during this period, the time and distance counts are
reset and start again from zero when the vehicle starts moving once again.
Switching on the opposite side turn indicators without pressing the switch in the in-
termediate reset position causes both the time and distance counters to reset and
recommence from zero.

Passing button (02_39)

Uses the high beam flash in case of danger or emergency.
Releasing the switch deactivates the high beam flash.
02_39

Flasher button (02_40)

(Ove previsto)
By pressing the button, with the ignition switch turned to "ON", the four turn indicators
and their warning lights on the panel turn on at the same time.
The HAZARD lights remains on even after removing the key but cannot be deactiva-
ted. To disconnect the HAZARD light, turn the switch to "ON" and press the button
again.
02_40
49