Table of Contents
Advertisement
Transport (04_37)
NOTE
BEFORE TRANSPORTING THE VEHICLE, IT IS NECESSARY TO EMPTY THE
FUEL TANK AND THE CARBURETTOR ADEQUATELY, CHECKING THAT THEY
ARE DRY.
DURING TRANSPORT, THE VEHICLE SHOULD BE UPRIGHT AND SECURELY
04_37
ANCHORED AND SHOULD HAVE THE FIRST GEAR ENGAGED SO AS TO AVOID
POSSIBLE FUEL, OIL OR COOLANT LEAKS.
IN CASE OF FAILURE, DO NOT TOW THE VEHICLE BUT CONTACT A ROAD
ASSISTANCE SERVICE INSTEAD TO HAVE THE INFLAMMABLE FLUIDS
DRAINED .
Chain backlash check (04_38)
To check the clearance:
•
Shut off the engine.
•
Rest the vehicle on its stand.
•
Engage neutral gear.
•
Check that the vertical oscillation at a point between the pinion and the crown
on the lower branch of the chain is approx. 25 - 30 mm (0.98 - 1.18 in).
•
Move the vehicle forward so as to check the chain vertical oscillation in other
positions too. clearance should remain constant at all wheel rotation phases.
04_38
If clearance is uniform but over 30 mm (1.18 in) or below 25 mm (0.98 in), adjustment
is necessary.
124
Advertisement
Table of Contents
