Install Raid Drivers - HP Compaq DX5150 Setup Manual

4. Select 'Automatically Configure' option.
5. Assign the source and target drive.
6. The message 'Are You Sure?' will display before completing
the configuration. Answer 'N' to abort the creation of the
new RAID set, or 'Y' to proceed with the RAID set creation.
7. Install the drivers for RAID in the Windows operating
system. Step 1a or 1b will need to be performed depending
on OS installation status.

Install RAID Drivers

Note: To install RAID Drivers while installing Microsoft
Windows XP operating system on the computer, go to
"B. Installing RAID Drivers during Microsoft Windows XP OS
Installation".
A. Installing RAID Drivers on Microsoft Windows XP OS
1. Run the SETUP program for the ATI South Bridge Drivers
which are located in C:\Compaq\RAID\Setup on your HP
dx5150 computer or may be downloaded from the HP Web
site (
http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_c
c=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1
&h_pagetype=s-002&h_query=dx5150&submit.x=4&submit.y
=9
updates to these drivers in the future. Follow the instructions
on the screen once the SETUP program is launched.
2. Verify the drivers are installed after restarting the operating
system (the setup program in the previous step will prompt
for a system restart).
a. Right click on 'my Computer' icon, select 'Properties,'
Installation and Setup Guide
www.hp.com
). Please check the HP support Web site for possible
left click on 'Hardware' tab, and then on 'Device
Manager' button.
www.hp.com
HP dx5150 RAID Installation and Setup Guide
or
5