Computer Setup-Uefi Drivers; Recovering The Configuration Settings - HP ProDesk 405 G4 Small Form Factor Maintenance And Service Manual

Computer Setup—UEFI Drivers
Lets you restart the computer into the 3rd Party Option ROM Management application. You can start this
application directly by pressing

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command with
the Computer Setup (F10) Utility before Restore is needed. (See the
the Computer Setup—File table.)
The Save to Removable Media option creates a file named HPSETUP.TXT on an inserted USB flash media
device. This file can be edited to change the settings on Restore. An asterisk (*) marks the selected option for a
setting.
NOTE: It is recommended that you save any modified computer configuration settings to a USB flash media
device and save the device for possible future use.
To restore the configuration, insert the USB flash media device with the saved configuration and perform
the Restore from Removable Media command with the Computer Setup (F10) Utility. (See the
Main on page 59
F3 during startup.
in the Computer Setup—File table.)
Computer Setup–Main on page 59
Recovering the Configuration Settings
in
Computer Setup–
69