X86 Or Amd64/Em64T On Hp Xw9300 Workstation Does Not Fully Enable The Use Of Hp Usb 2.0 Disk-On-Key Devices; Description; Scope; Resolution - HP xw3400 User Manual

User manual for linux
Hide thumbs Also See for xw3400:
Table of Contents

Advertisement

x86 or AMD64/EM64T on HP xw9300 Workstation Does Not Fully
Enable the Use of HP USB 2.0 Disk-On-Key Devices

DESCRIPTION

There is an infrequent situation where a 2.0 USB disk-on-key/jump drive will not be properly
recognized by the operating system when plugged into an HP xw9300 Workstation. The error
message indicates that the USB device is not a valid block device.

SCOPE

This problem has only been observed with HP-branded 2.0 USB Disk-on-Keys. All other USB devices
tested with (1.1 and 2.0 devices) do not show this problem.

RESOLUTION

You can work around this problem by inserting the problem device in one of the other USB ports
available on the HP xw9300 Workstation.
AMD64/EM64T on HP xw9300 Workstation Does Not Contain the
Necessary LAN Drivers to Enable Network Install or PXE Booting
DESCRIPTION
RHEL 3 Update 4 does not properly recognize the network device provided by the nForce
Professional 2200 chipset, which is in the HP xw9300 Workstation. Because the install
kernel/process does not include this LAN driver, network installs and PXE booting will not work.
SCOPE
This affects all versions of RHEL 3 U4 running on any HP xw9300 Workstation.
RESOLUTION
NOTE: This issue has been resolved in RHEL3U5. If you are using RHEL3U4, then the following
resolution still applies.
1. Go to http://www.hp.com/support/xw9300.
2. Click download drivers and software.
3. Click Red Hat Enterprise Linux 3 (AMD64/EM64T)
4. Under the Utility Tools section of the table, you will find Network/PXEboot install for nForce
Professional 2200. Select obtain software to download xw9300_network_install.tgz.
5. Unpack the file: tar xvfz xw9300_network_install.tgz
The file contains:
isolinux/initrd.img
images/boot.iso
images/pxeboot/initrd.img
SRPMS/kernel-2.4.21-27.EL.src.rpm
The initrd.img and the initrd.img within the boot.iso contain the needed LAN drivers to
support the nForce Professional 2200 built-in-LAN.
30

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xw4100Xw4300Xw4400Xw4550Xw4600Xw6000 ... Show all

Table of Contents