Verify Driver Installation Under Windows Xp - HP Compaq DX5150 Setup Manual

2. Put the INF file on a floppy disk or any media that is
accessible during the Windows operating system installation.
3. Install the new SATA drive(s) in the computer.
a. Power off the system.
b. Connect the hard drives to the SATA ports.
c. Power up the system.
4. Install the driver during the Windows OS startup.
a. Insert your Windows XP CD into the CD-ROM/DVD
b. Press the
c. Press 's' when setup asks if you want to specify an
d. Press
e. Press
f.
g. Install the Windows OS on the Master RAID drive. After
Installation and Setup Guide
drive, or the XP boot diskette #1 in the floppy drive if
your system cannot boot from the CD.
F6
function key for third party SCSI or driver
installation at the beginning of the text mode installation.
additional device, and insert the diskette or CD that
contains the ATI SATA RAID drivers.
Enter
and select 'ATI Serial ATA Controller.'
Enter
to continue with text mode setup.
Partition and format the Master RAID drive by following
the setup instructions to select your choice of partition
and file system during Windows installation.
Windows setup has examined your drives, it will copy
files to Windows installation folders and restart the
system.
www.hp.com
HP dx5150 RAID Installation and Setup Guide
7