Install Raid Drivers During Windows Os Install - HP Compaq DX5150 Setup Manual

4. Select 'Automatically Configure' option.
If you chose manual configuration for Striped Sets, you can
change the chunk size. Assign the source and target drive.
5. The message 'Are You Sure?' will display before completing
the configuration. Answer 'N' to abort the creation of the
new RAID set, or 'Y' to proceed with the RAID set creation.
Install RAID Drivers during Windows OS
Install
1. The RAID drivers are in the C:\Compaq\RAID\INF folder on
your HP dx5150 computer or they may be downloaded from
the HP web site (
http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_c
c=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1
&h_pagetype=s-002&h_query=dx5150&submit.x=4&submit.y
=9
updates to these drivers in the future. The RAID drivers are
included in the ATI CHIPSET softpaq.
2. Put the INF file on a floppy diskette or any media that is
accessible during the Windows operating system installation.
3. Insert your Windows XP CD into the CD-ROM/DVD drive,
or the XP boot diskette #1 in the floppy drive if your system
cannot boot from the CD.
4. Press the
installation at the beginning of the text mode installation.
5. Press 's' when setup asks if you want to specify an additional
device, and insert the diskette or CD that contains the ATI
SATA RAID drivers.
6. Press
7. Press
Installation and Setup Guide
). Please check the HP support Web site for possible
F6
function key for third party SCSI or driver
Enter
and select 'ATI Serial ATA Controller.'
Enter
to continue with text mode setup.
www.hp.com
HP dx5150 RAID Installation and Setup Guide
www.hp.com
or
11