Husqvarna TE 250 Owner's Manual page 68

12 SERVICE WORK ON THE CHASSIS
66
–
Mount the chain.
–
Connect the chain with the connecting link.
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
F02306-10
(All EU/AR standard models)
–
Join plug-in connector
S04828-11
–
Position the foot brake cylinder.
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
S04833-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
S04834-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the link fork slightly to be able to mount the
screw more easily.
3
of the brake light switch.
4
engages in the foot brake cylinder.
5
.
M6 10 Nm (7.4 lbf ft)
6
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
7
.
M10 60 Nm (44.3 lbf ft)
®
Loctite 2701™