Table of Contents
Advertisement
Please note: If a power level is not set within approximately ten
seconds, the hob will switch off automatically.
After switching the mains supply on to the hob, or if the mains
supply is interrupted and then restored, the safety key lock may
be active. The safety key lock LED will be on to indicate this. Simply
press and hold the lock sensor
deactivate the safety key lock and proceed to use the hob as normal.
To set the power level
•
After switching the hob on, simply select the desired heat setting
using the
ranges from 1 (minimum) to 9 (maximum). The hob will then begin
heating. You can also press the
to power level 9.
To turn the power off to a zone
•
To switch off a zone you can use the zone's
the heat setting to 0 or alternatively you can press both the
and
selectors simultaneously for that zone. The cooking zone
indicator will display a '0' to confirm that the zone is now inactive.
•
If switching off multiple zones, the above steps need to be taken
for each zone. When all the zones are at '0', the hob will switch off
automatically after approximately ten seconds.
•
Alternatively, to switch off the hob immediately, touch and hold the
on/off sensor
Please note: Any zones that are still hot to the touch should display
an " " provided the mains power supply is not interrupted.
or
selectors for that zone. The power level
for approximately two seconds.
for approximately two seconds to
selector first to jump straight
selector to return
7
Advertisement
Table of Contents
