CDA HC7600 Installation - Use - Maintenance page 5

Table of Contents

Advertisement

Do not place hot lids flat on the hob top. A "suction" effect could
cause damage to the hob.
Do not drag cookware across the hob top: in the long term, this
could cause damage to the hob.
Do not store cleaning or flammable products in the unit below the
hob.
Always use appropriate cookware.
Do not cook unopened tins of food directly on the hob.
Never put cooking foil or plastic materials on the ceramic surface
when the hob is hot. These materials could melt and cause
damage to the hob.
This hob (Class 3) has been designed for use only as a cooking
appliance. Any other use should be considered incorrect and
therefore dangerous.
Important
Do not use the hob if the glass surface is cracked or damaged to
prevent the risk of electric shock. Disconnect it from the power
supply.
Ensure that the power cable of a connected electrical appliance
near the hob is not in contact with the cooking zones.
Please note:
When connecting the hob to the power and switching it on for the
first time the cooking zone displays may show the letter " ". This is
not a fault and the letter " " should disappear after approximately
one hour. Please see page 11 - 12 for more information.
The safety key lock may be active. Simply press and hold the
safety key lock sensor
for 2 - 3 seconds to deactivate it.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hc7600fr

Table of Contents