Chapter 25 Troubleshooting
• Turn the NWA1123-AC PRO indoor AP counter-clockwise to detach it from the mounting bracket.
25.6 Resetting the NWA1123
If you cannot access the NWA1123 by any method, try restarting it by turning the power off and then on
again. If you still cannot access the NWA1123 by any method or you forget the administrator
password(s), you can reset the NWA1123 to its factory-default settings. Any configuration files or shell
scripts that you saved on the NWA1123 should still be available afterwards.
Use the following procedure to reset the NWA1123 to its factory-default settings. This overwrites the
settings in the startup-config.conf file with the settings in the system-default.conf file.
Note: This procedure removes the current configuration.
Make sure the Power LED is on and not blinking.
1
NWA1123 Series User's Guide
205