Table of Contents
Advertisement
Second Edition • First Printing
29 Release the control handle.
Result: The platform should stop raising.
30 Press and hold the function enable switch on
the control handle. Slowly move the control
handle in the direction indicated by the yellow
arrow.
Result: The platform should lower. The
descent alarm should sound while the platform
is lowering.
Test the Outdoor Use Button
31 Do not press and hold the function enable
switch on control handle.
32 Press the outdoor use button.
Result: The LED under the outdoor button will
illuminate.
33 Press the lift function enable button.
34 Press and hold the function enable switch on
the control handle. Slowly move the control
handle in the direction indicated by the blue
arrow.
Result: The platform should raise to 10 ft
6 in/3.2 m and stop.The alarm should sound.
The platform controls LED readout should
display OHL and the ground controls LCD
should display OHL:OUTDOOR HEIGHT
LIMIT.
Part No. 1301858GT
Test the Drive Function Button
35 Press the drive function button.
36 Wait seven seconds for the drive function to
time out.Slowly move the control handle in the
direction indicated by the blue arrow, then in
the direction indicated by the yellow arrow.
Result: No functions should operate.
Test the Steering
Note: When performing the steer and drive function
tests, stand in the platform facing the steer end of
the machine.
37 Press the drive function button.
38 Press and hold the function enable switch on
the control handle.
39 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
blue triangle on the control panel.
Result: The steer wheels should turn in the
direction indicated by the blue triangle.
40 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
yellow triangle, on the control panel.
Result: The steer wheels should turn in the
direction indicated by the yellow triangle.
™
GS
-1330m
Operator's Manual
Inspections
31
Advertisement
Table of Contents
