HP Brio 8200 Online Manual page 43

Installing Video Memory
Static electricity can damage electronic components. Turn off all equipment. Don't let your clothes touch the
Caution
accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing
the accessory from the bag. Handle the accessory as little as possible and with care.
1 Remove the computer's cover (refer to
2 On a table top turn the computer onto its side, with the system board closest to the surface of the table.
3 Align the video memory module directly over the socket, making sure that the tapered end of the module is facing the
right of the computer (looking from the front).
4 Firmly press the memory module completely into the socket.
5 Repeat steps 3 and 4 for the second memory module.
6 Install any other accessories before returning the computer to the upright position, replacing the cover and
reconnecting the power supply cords and any telecommunications cables.
7 Turn on the display and then turn on the computer.
8 In Windows, change the video resolution and the number of colors displayed. To do this, right-click on the desktop, and
then click Properties, then select the Settings tab.
"Removing the Cover" on page
Arrow
System Board
3 Upgrading and Adding Accessories
37).
Circle
The small circle on
the module should
match up with a
small arrow on the
socket.
Upgrading Hardware
43