Upgrading Hardware; Removing And Replacing The Cover - HP Brio 8200 Online Manual

Upgrading Hardware

Removing and Replacing the Cover

Warning
You need to remove the computer's cover to install accessories or to gain access to the system configuration jumpers.
Removing the Cover
1 Turn off the computer and display, and disconnect all power supply cords and any telecommunications cables.
2 Remove the four screws from the back of the computer.
3 Pull the cover back 1.5 cm, then lift it completely off the computer's chassis.
Œ
For your safety, never remove the computer's cover without first removing the power cord and any connection to a
telecommunications network. Always replace the cover before reconnecting any cables to your computer.

3 Upgrading and Adding Accessories
Upgrading Hardware
Ž
1.5 cm
37