If you are in any doubt about whether you can lift the equipment safely, do not try to move it without help. Please read carefully the relevant sections in your HP Brio PC’s documentation for safety instructions relating to: unpacking and setting up your display...
Page 3
Positioning the Computer and the Display If you have a tilt-swivel, attach it to the display as described in the display manual. Refer to your display documentation to make sure it is firmly attached. Position the display on your desk. Place the computer under your desk.
Page 4
Connecting Your Printer to the Computer Connecting your Sound Card (optional) Insert the printer connector into the back of the computer, as shown in the illustration. PARALLEL If you have a serial printer, connect it to the socket labeled SERIAL. If you have a parallel printer, connect it to the socket labeled PARALLEL.
Connecting the Telephone Cable (if applicable) Connect the telephone cable to the modem on the back of your computer, using the most appropriate configuration. Connecting the Computer and Display Power Cords VOLTAGE SWITCH Check that the voltage of your computer is set to the correct value for the coun- try that you are in.
HP Brio Center. The HP Brio Center lets you get the most out of your PC, quickly and efficiently, while at the same time being your first point of reference to all questions or problems you might encounter.