Upgrades And Accessories You Can Install - HP Brio 8200 Online Manual

Upgrades and Accessories You Can Install

Some of the additional accessories that you can add to your computer are shown here.
Preinstalled
5.25-inch Hard
Disk Drive
(some models)
(Drive C)
3.5-inch Hard
Disk Drive bay
Preinstalled
3.5-inch
Floppy Disk
Drive
(Drive A)
Preinstalled
3.5-inch Hard
Disk Drive
(some models)
(Drive C)
Expansion
Cards
For example,
a LAN card
† Sockets are shown filled. Empty sockets on your computer's system
board indicate that an upgrade is possible.
Contact your reseller for HP accessory part numbers.
Models either have a
preinstalled 5.25-inch hard disk
drive or a preinstalled 3.5-inch
hard disk drive.
Front-Access Device Shelves
· CD-ROM Drive bay
· 5.25-inch Accessory bay
· 5.25-inch Floppy or Hard Disk Drive bay
· 3.5-inch Floppy Disk Drive (Drive A)
· Second 3.5-inch Floppy Disk, Zip or Tape Drive bay
Video Memory
Upgrade Modules
1 MB (2 512 KB
modules)
Front Bezel
Backplane
Connector
Battery
CMOS Jumper
Strip
3 Upgrading and Adding Accessories
†
IDE and Floppy Drive
Power Connectors
Connectors
(to power supply)
Jumper Strip JP4 -
Processor Voltage
Processor Upgrade
JP37
Front Bezel Fan
JP5 JP7 Connector
Status Panel Connector
Main Memory Upgrade
Modules
16 MB, 32 MB, or
64 MB
Jumper Strip JP5 -
Processor/Bus Speed
System Board
Why Upgrade?
†
35