Table of Contents
Advertisement
USER PROGRAMS
STEP 1: Press the User 1-2 key once for User 1 or twice for User 2 then press
Enter. Note that the dot matrix display portion will have a single row of segments
at the bottom (Unless there is a previously stored program).
STEP 2: The customer can to set the user name on this step and fallow the
directions in the message center.
STEP 3: The Message Center will now be blinking an Age value. Adjust the age
and press Enter.
STEP 4: The Message Center will now be blinking a bodyweight value. Enter your
bodyweight and press Enter.
STEP 5: Note the clock/ Message Center is flashing. Use the Adjust + or - keys to
adjust up from 30 minutes (if desired). Press the Enter key. This is a must to
continue even if time is not adjusted.
STEP 6: The Message Center will now be blinking the preset top speed (3 mph or
3 kmph) of the selected program. Use the Speed + or - keys to adjust, then press Enter. Each program has
various speed changes throughout; this allows you to limit the highest speed the program can reach.
STEP 7: The first column (segment) will now be blinking. Using the + or - keys, adjust the speed level to your
desired effort for the first segment then press enter. The second column will now be blinking. Repeat the
above process until all 20 segments have been programmed. The first column will be blinking again. This is
for the incline programming. Repeat the above process to program all 20 segments for incline.
STEP 8: Press the Start button to begin the workout and also save the program to memory or press Enter to
go back one step to reprogram.
CALORIE PROGRAM
STEP 1: Press the Calorie key to select this program. The display will prompt you through the programming.
STEP 2: The Message Center will now be blinking a value, indicating your Age(default is 35). Entering your
correct age affects the heart rate Bar Graph Display and the Heart Rate programs. Use the + or - keys to
adjust, then press Enter. Your age determines your recommended maximum heart rate. Since the Bar Graph
Display and the Heart Rate features are based on a percentage of your maximum heart rate, it is important to
enter the correct age for these features to work properly.
STEP 3: The Message Center will now be blinking a value, indicating your Body Weight (default is 70#).
Entering the correct body weight will affect the calorie count. Use the + or - keys to adjust, then press Enter.
A note about the Calorie display: No exercise machine can give you an exact calorie count because there
are too many factors which determine exact calorie burn for a particular person. Even if someone is the exact
same body weight, age and height, their calorie burn may be very different than yours. The Calorie display is
to be used as a reference only to monitor improvement from workout to workout.
STEP 4: The Message Center displays "Use the speed + or – keys to adjust Calorie burn" (default is 300)
after adjusting, press Enter.
STEP 5: The Message Center will now be blinking the preset top speed of the selected program(3 mph or 3
kmph). Use the + or - keys to adjust, then press Enter. Each program has various speed changes throughout;
this allows you to limit the highest speed the program can reach.
STEP 6: The Message Center will be blinking the preset top incline of the selected program (1.0%). Use the
speed + or – keys to adjust, then press Enter.
STEP 7: The Message Center displays the Program Time (a value that that was determined by the data you
entered in steps 2-6); Press Start to accept the calculated Time or Enter to return to steps
3-6 and change the data, which will recalculate the Program Time.
•When the Start key is pressed, the program begins with a 3:00 warm up (1:00 @ 1mph/kmph, 1:00 @ 2mph/kmph, and
1:00 @ 3mph/kmph) or you have the option of pressing the Start again to bypass and begin the workout.
•When the program begins both the Calorie and Time windows will count down to 0. If the Time expires before calories
burned reaches 0, the Time window will begin accumulated time, until Calories reach 0.
•After the program has ended, there will be a 3:00 cool down (1:00 @ 3mph/kmph, 1:00 @ 2mph/kmph, and 1:00 @
1mph/kmph)or you have the option of pressing the Stop key to end the workout.
19
Advertisement
Table of Contents
