Table of Contents
Advertisement
BASE COVERS
3
1. Attach the bottom console covers (52 & 53) to the console with five Sheet Metal Screws (105)
on each side. Tighten with the Phillips Head Screw Driver (109) or Combination M5 Allen
Wrench & Phillips Head Screw Driver (107).
2. Attach the cross brace (3) to the console mast tubes (4 & 5) with two Button Head Socket Bolts
(102) on each side. Tighten with the M6 Allen Wrench (106).
3. Firmly tighten the eight Button Head Socket Bolts inserted in Step 1 with the M6 Allen Wrench
(106). Place the accessory holder tray (48) securely on top of the cross brace (3).
HARDWARE
#102. 5/16" x 15mm
Button Head Socket
Bolt (4 pcs)
#105. 3.5 x 12mm
Sheet Metal Screw
(10 pcs)
10
Advertisement
Table of Contents
