Spirit SPT0042 Owner's Manual page 10

2
CONSOLE ASSEMBLY
1. Connect the following cables together: Incline cables 35 to 39, Speed cables 34 to 38, and
Computer cables 33 to 31.
2. Place the console (37) onto the brackets at the top of the console mast tubes and attach with two
Button Head Bolts (104) and two Split Washers (108) on each side. Caution: Be careful not to
pinch any of the cables. Doing so may affect the console function. Firmly tighten with the
Combination M5 Allen Wrench & Phillips Head Screw Driver (107).
HARDWARE
#108. 3/8" x 2.0T
Split Washer (4 pcs)
#104. 3/8" x 1-3/4"
Button Head Socket
Bolt (4 pcs)
9