Table of Contents
Advertisement
Administrator Information
Items
Enable WSD
Printing Timeout (sec)
Scanning Timeout (sec)
Device Name
Location
LLTD Settings
Items
Enable LLTD
Device Name
LLMNR Settings
Items
Enable LLMNR
LPR Settings
Items
Allow LPR Port Printing
Printing Timeout (sec)
RAW(Port9100) Settings
Items
Allow RAW(Port9100) Printing
Printing Timeout (sec)
IPP Settings
Items
Enable IPP
>
Advanced Security Settings
Setting value and Description
Select this to enable adding devices using WSD, and print
and scan from the WSD port.
Enter the communication timeout value for WSD printing
between 3 to 3,600 seconds.
Enter the communication timeout value for WSD scanning
between 3 to 3,600 seconds.
Displays the WSD device name.
Displays the WSD location name.
Setting value and Description
Select this to enable LLTD. The printer is displayed in the
Windows network map.
Displays the LLTD device name.
Setting value and Description
Select this to enable LLMNR. You can use name resolution
without NetBIOS even if you cannot use DNS.
Setting value and Description
Select to allow printing from the LPR port.
Enter the timeout value for LPR printing between 0 to 3,600
seconds. If you do not want to timeout, enter 0.
Setting value and Description
Select to allow printing from the RAW port (Port 9100).
Enter the timeout value for RAW (Port 9100) printing be-
tween 0 to 3,600 seconds. If you do not want to timeout, en-
ter 0.
Setting value and Description
Select to enable IPP communication. Only printers that sup-
port IPP are displayed.
448
>
Controlling Using Protocols
Advertisement
Table of Contents
